Editing Yeast
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.
Latest revision | Your text | ||
Line 108: | Line 108: | ||
Worts that are prepared with reasonable percentages of malt tend to be rich in amino acids. Low FAN levels are undesirable in wort. The traditional rule is that serious problems (long lags, high diacetyl, etc) can result from FAN below 150-175ppm. A 12°P malt wort will typically have 225-275ppm FAN, which is ideal.<ref name=fix>Fix, George. ''Principles of Brewing Science.'' 2nd ed., Brewers Publications, 1999.</ref> As a general rule, it is usually desirable to keep FAN levels below 350ppm, something that can be achieved with a suitable [[mashing]] schedule. | Worts that are prepared with reasonable percentages of malt tend to be rich in amino acids. Low FAN levels are undesirable in wort. The traditional rule is that serious problems (long lags, high diacetyl, etc) can result from FAN below 150-175ppm. A 12°P malt wort will typically have 225-275ppm FAN, which is ideal.<ref name=fix>Fix, George. ''Principles of Brewing Science.'' 2nd ed., Brewers Publications, 1999.</ref> As a general rule, it is usually desirable to keep FAN levels below 350ppm, something that can be achieved with a suitable [[mashing]] schedule. | ||
Too much or too little FAN can increase diacetyl production during fermentation.<ref name=fix/> | Too much or too little FAN can increase diacetyl production during fermentation.<ref name=fix/> |