Sodium: Difference between revisions
No edit summary |
Tags: Mobile edit Mobile web edit |
||
(2 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
{{In progress}} | {{In progress}} | ||
Sodium (Na<sup>+</sup>) | Sodium (Na<sup>+</sup>) is a mineral naturally present in [[water]]. Sodium ions are not involved in chemical reactions with other components but pass unchanged into the beer.<ref name=monmay/> Na+ has sweet/mouthcoating/salty direct flavor effects.<ref name=hob/> Yeast cells do not accumulate sodium, but rather they continuously excrete it to ensure low intracellular levels.<ref name=hob>Taylor DG. Water. In: Stewart GG, Russell I, Anstruther A, eds. [[Library|''Handbook of Brewing.'']] 3rd ed. CRC Press; 2017.</ref> | ||
levels | |||
* up to 100 mg/L = palate-sweetening effect, especially in association with chloride ions.<ref name=hob>Taylor DG. Water. In: Stewart GG, Russell I, Anstruther A, eds. [[Library|''Handbook of Brewing.'']] 3rd ed. CRC Press; 2017.</ref> | |||
* 50–120 ppm = full sweetness<ref name=smart1>Howe S. Raw materials. In: Smart C, ed. [[Library|''The Craft Brewing Handbook.'']] Woodhead Publishing; 2019.</ref> | |||
* > 120 ppm = similar sourness to magnesium<ref name=smart1/> | |||
* 70-150 ppm = improve mouthfeel and fullness, rounds out flavors, accentuates sweetness of malt, especially in association with [[chloride]] ions.<ref name=water/> (75–150 mg/l) to enhance "palate-fullness" and a certain sweetness.<ref name=bsp/> | |||
* 150-200 ppm = salty taste<ref name=water/> sour/salty flavor<ref name=bsp/> salty taste, especially as sodium chloride<ref name=hob/> | |||
* > 250 = taste harsh, bitter, sour, or metallic<ref name=water/> harsh and sour<ref name=hob/> | |||
suggested max | |||
* Keeping the sodium to under 100ppm is suggested.<ref name=water/> | |||
* 150 mg/litre is a proposed maximum concentration<ref name=bsp>Briggs DE, Boulton CA, Brookes PA, Stevens R. [[Library|''Brewing Science and Practice.'']] Woodhead Publishing Limited and CRC Press LLC; 2004.</ref> | |||
'''Beer sodium content:''' Commercial beers tend to have around 10 to 75 mg/L sodium, with an average (mean) of 35 mg/L.<ref name=water/> | |||
== Potential sources of sodium and the final content in beer == | |||
* '''Brewing water''' - The [[water]] used to make beer may contain dissolved sodium. The sodium level in typical North American municipal tap water ranges from 0–195 mg/L.<ref name=azogar>Azoulay A, Garzon P, Eisenberg MJ. [https://onlinelibrary.wiley.com/doi/full/10.1111/j.1525-1497.2001.04189.x Comparison of the mineral content of tap water and bottled waters.] ''J Gen Intern Med.'' 2001;16(3):168–175.</ref> The sodium content of tap water can be especially high if the water is treated with a "water softener", which typically makes it unsuitable for brewing.<ref name=water>Palmer J, Kaminski C. [[Library|''Water: A Comprehensive Guide for Brewers.'']] Brewers Publications; 2013.</ref> | |||
* '''Grain''' - The level of sodium in [[malt]] depends on the levels in the processing water at the [[malting]] facility.<ref name=monmay>Montanari L, Mayer H, Marconi O, Fantozzi P. [https://www.sciencedirect.com/science/article/abs/pii/B9780123738912000341 Chapter 34: Minerals in beer.] In: Preedy VR, ed. [[Library|''Beer in Health and Disease Prevention.'']] Academic Press; 2009:359–365.</ref> | |||
* '''Salt additives''' - Brewers can enrich the sodium level of the wort | |||
== Effects of sodium == | |||
The sole effect of sodium in brewing is on the flavor and mouthfeel characteristics of the beer. | |||
* '''Flavor''' - | |||
== How to adjust the sodium level == | |||
Sodium | they contribute to the perceived flavor of the beer by enhancing its sweetness. Sodium levels from 75 to 150 ppm give a round smoothness and accentuated sweetness, which is more pleasant when paired with [[chloride]] ions than when associated with [[sulfate]] ions. In the presence of sulfate, sodium creates an unpleasant harshness, so the more sulfate there is in the water, the less sodium there should be (and vice versa) (Goldammer, 2000). If the sodium levels exceed 150 ppm, it could indicate contamination by a [[cleaning]] solution (e.g. [[sodium hydroxide]]).<ref name=monmay/> | ||
== See also == | |||
* [[Water]] | |||
* [[Sodium chloride]] | |||
* [[Sodium bicarbonate]] | |||
*https://pdfs.semanticscholar.org/3202/f1728f72c98ff4325238467aba03633e2861.pdf | |||
* | |||
== References == | == References == | ||
[[Category:brewing chemistry]] | [[Category:brewing chemistry]] |
Revision as of 01:20, 26 April 2024
Please check back later for additional changes
Sodium (Na+) is a mineral naturally present in water. Sodium ions are not involved in chemical reactions with other components but pass unchanged into the beer.[1] Na+ has sweet/mouthcoating/salty direct flavor effects.[2] Yeast cells do not accumulate sodium, but rather they continuously excrete it to ensure low intracellular levels.[2]
levels
- up to 100 mg/L = palate-sweetening effect, especially in association with chloride ions.[2]
- 50–120 ppm = full sweetness[3]
- > 120 ppm = similar sourness to magnesium[3]
- 70-150 ppm = improve mouthfeel and fullness, rounds out flavors, accentuates sweetness of malt, especially in association with chloride ions.[4] (75–150 mg/l) to enhance "palate-fullness" and a certain sweetness.[5]
- 150-200 ppm = salty taste[4] sour/salty flavor[5] salty taste, especially as sodium chloride[2]
- > 250 = taste harsh, bitter, sour, or metallic[4] harsh and sour[2]
suggested max
- Keeping the sodium to under 100ppm is suggested.[4]
- 150 mg/litre is a proposed maximum concentration[5]
Beer sodium content: Commercial beers tend to have around 10 to 75 mg/L sodium, with an average (mean) of 35 mg/L.[4]
Potential sources of sodium and the final content in beer
- Brewing water - The water used to make beer may contain dissolved sodium. The sodium level in typical North American municipal tap water ranges from 0–195 mg/L.[6] The sodium content of tap water can be especially high if the water is treated with a "water softener", which typically makes it unsuitable for brewing.[4]
- Grain - The level of sodium in malt depends on the levels in the processing water at the malting facility.[1]
- Salt additives - Brewers can enrich the sodium level of the wort
Effects of sodium
The sole effect of sodium in brewing is on the flavor and mouthfeel characteristics of the beer.
- Flavor -
How to adjust the sodium level
they contribute to the perceived flavor of the beer by enhancing its sweetness. Sodium levels from 75 to 150 ppm give a round smoothness and accentuated sweetness, which is more pleasant when paired with chloride ions than when associated with sulfate ions. In the presence of sulfate, sodium creates an unpleasant harshness, so the more sulfate there is in the water, the less sodium there should be (and vice versa) (Goldammer, 2000). If the sodium levels exceed 150 ppm, it could indicate contamination by a cleaning solution (e.g. sodium hydroxide).[1]
See also
References
- ↑ a b c Montanari L, Mayer H, Marconi O, Fantozzi P. Chapter 34: Minerals in beer. In: Preedy VR, ed. Beer in Health and Disease Prevention. Academic Press; 2009:359–365.
- ↑ a b c d e Taylor DG. Water. In: Stewart GG, Russell I, Anstruther A, eds. Handbook of Brewing. 3rd ed. CRC Press; 2017.
- ↑ a b Howe S. Raw materials. In: Smart C, ed. The Craft Brewing Handbook. Woodhead Publishing; 2019.
- ↑ a b c d e f Palmer J, Kaminski C. Water: A Comprehensive Guide for Brewers. Brewers Publications; 2013.
- ↑ a b c Briggs DE, Boulton CA, Brookes PA, Stevens R. Brewing Science and Practice. Woodhead Publishing Limited and CRC Press LLC; 2004.
- ↑ Azoulay A, Garzon P, Eisenberg MJ. Comparison of the mineral content of tap water and bottled waters. J Gen Intern Med. 2001;16(3):168–175.