Kegging
Please check back later for additional changes
Kegerator units
5 gallon keg options
- AEB Corny (MoreBeer) - highest quality
- Kegland Corny (MoreBeer)
- Torpedo
- Slimline Torpedo
- Komos
- Sankey
Buna-N gaskets for Corny kegs:[1]
Buna-N (nitrile) is the recommended gasket material because it allows less oxygen transmission than silicone (and therefore the beer will stay fresh longer).[citation needed] Several brewers suggest that the x-profile gaskets form a better seal than round gaskets,[2] although some leaks may still be stubborn depending on the condition of the keg. The x-profile gaskets may also have increased resistance to oxygen transmission compared to round gaskets assuming they form a greater radius when the gasket is compressed, however this is unproven.
Socket to remove posts: 7/8" 6-point deep socket (Amazon)
Ball lock fittings:
- Beverage 8mm Duotight MoreBeer, Howdy Brewer
- Gas 8mm Duotight MoreBeer, Howdy Brewer
https://www.valuebrew.com/product/duotight-compatible-locking-clips/30
Floating dip tubes:
https://www.homebrewtalk.com/threads/best-floating-dip-tube.726607/
Spunding valve:
- https://www.morebeer.com/search?search=blowtie Amazon Amazon Amazon
- MoreBeer[3]
- https://themodernbrewhouse.com/forum/viewtopic.php?f=18&t=2570&p=55035&hilit=Air+regulator+plug#p55035
Spunding should be started as late as possible, based on the FFT result.[4]
References[edit]
- ↑ Replacement part list. The Modern Brewhouse website. March 2022. Accessed March 8 2022.
- ↑ Killer deals and steals! The Modern Brewhouse website. July 2021. Accessed March 7 2022.
- ↑ Cheap spunding valve build. The Modern Brewhouse website. February 2018. Accessed March 2022.
- ↑ Piper D, Jennings S, Zollo T. Pro-tips on lager decoction mashing, infusion mashing, yeast handling & sauergut (video). YouTube. Published 2022. Accessed 2024.